Tips for using fishing reels are critical to improving fishing efficiency and success. The following is a detailed summary and conclusion of fishing wheel use techniques based on information in the referenced articles:

I. Installing the Fishing Reel

1. Adjust the slot: First, adjust the fishing reel mounting slot on the handle part of the casting rod, and turn the knob of the slot to prepare for installation.

2. Insert and fix: Align and insert the base of the fishing wheel into the slot, make sure it is stable, and then tighten the knob again until the fishing wheel is fixed firmly without any shaking.

Casting Techniques

1. Winding the fishing line: Use the spool winder to wind the fishing line evenly on the cup of the fishing reel, make sure the spool is tight and loose.

2. Adjust the unloading force and brake: After installing the fishing reel, adjust the size of unloading force and weak brake force according to the fishing environment and target fish species.

3. Casting action: Lift the fishing rod backward and start casting, when the line set is driven by the fishing rod from back to front when spinning, press the casting switch, the line set will be thrown out.

Adjustment Technique

1. Crank strength and speed: The crank is used to control the release length and recovery speed of the line. According to the fish's reaction and pulling force, adjust the strength and speed of the crank at the right time.

2. Tightness of front and rear drags: The adjustment of front and rear drags can effectively prevent the line from being too tight or too loose. The front drag reduces the tension when the fish suddenly exerts force, and the rear drag increases the resistance when the fish is powerful.

Precautions

1. Observe the state of the fishing reel: In the process of using, pay attention to observe the running state of the fishing reel, such as the degree of swaying left and right, whether the line wheel up and down evenly, etc., to ensure that the fishing reel has good performance.

2. Even and effective brakes: Check whether the brakes of the fishing wheel are even and effective, and whether the lock is strong and in place to ensure that there will be no accidents in the fishing process.

3. Choose according to the environment: Choose the right fishing reel and bait according to the fishing environment and target fish species. For example, fishing in large waters requires the selection of fishing wheels with long or wide winding parts in order to cast farther.

V. Maintenance and upkeep

1. Regular cleaning: clean the fishing wheel in time after use to avoid sand, dust and other impurities that may cause wear and tear on the fishing wheel.

2. Check the parts: Regularly check the parts of the fishing wheel, such as the crank, line wheel, brake, etc., to ensure that they are intact and in good condition.

3. Storage environment: Fishing wheels should be stored in a dry, ventilated place to avoid moisture and high temperature damage to the fishing wheel.

By mastering the above tips on how to use a fishing reel, you can become more skillful in using a fishing reel and improve the efficiency and success rate of fishing. At the same time, paying attention to the maintenance and care of the fishing wheel is also the key to ensure that the performance of the fishing wheel is long-lasting.